- Home Theaters
- Studios
- Jamming Rooms
- Recording Rooms
- Monitor Rooms
- Machine Canopy
- Schools
- Anechoic Chambers
- Silent Rooms
- Cinemas and Multiplexes
Bass Traps
Bass traps and diffusers are designed to absorb low-frequency sound waves, which often reflect from corners. The DIY acoustic foam bass traps feature a special cut design on the front to diffuse sound while simultaneously absorbing boomy bass.
These bass traps typically come in a size of 2’x2’x1’ with a center thickness of 8.5” to control unwanted bass. They help keep low frequencies at an optimum level and can be applied to all four corners or selected areas as needed.
The amount of bass trap coverage required depends on the intensity of the bass. Bass traps are essential for soundproofing in music studios, nightclubs, auditoriums, and other venues.
Product Detail
- Mega Bass Trap diffusers are precisely cut at 90 degrees to fit easily and absorb low frequencies, which are tough in the corners.
- Center thickness is 9 inches to control the heaviest bass.
- The special design on the front helps to further diffuse the bass before it’s absorbed.
- Made using high-density Acoustic Polyurethane with an NRC > 1.50. NRC is the Noise Reduction Coefficient, meaning it will absorb 150% of the sound it encounters.
- Must be used on all corners for the best results.
- Can be used vertically or horizontally in the corners.
- DIY product & easy to install using MMT Acoustix Spray Adhesive.
- The choice and preferred product of amateurs, veterans, and professionals globally.
- Available with front wooden panels for better aesthetics and diffusion.
Specification
| Description | Length (ft) | Breadth (ft) | Thickness (inch) | MOQ (pcs) | Coverage (sqft) |
| Piece | 2 | 2 | 9 | 1 | 4 |
Application Industry:
Application Guide:
- Apply spray adhesive on the flat side of the panel.
- Align the sheet/tile where it needs to be applied.
- Press using hands. It dries and sticks immediately.
